BOSE Home Theater Universal Remote Codes and How to Program

If you are looking forward to programming the BOSE Home Theater universal remote but are not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the BOSE Home Theater universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.

Bose Home Theater Universal Remote codes 

bose universal remote codes list

Bose Cinemate Digital Home Theater Speaker System Remote 4 Digit Codes

  • 1960
  • 3741
  • 0666
  • 1256
  • 1280
  • 1229

BOSE Home Theater Universal Remote 5 Digit Codes

  • 01982
  • 31517
  • 30189
  • 31229
  • 11144
  • 31933
  • 31934
  • 31935
  • 20752

Universal Remote 4 Digit Codes For older BOSE Home Theater Systems:

  • 01106
  • 01187
  • 01376
  • 01254
  • 00476
  • 00276
  • 00810

What a person requires when they want to program the BOSE Home Theater universal remote control?

When you are looking forward to programming the BOSE Home Theater universal remote control, certain requirements are a must to fulfill. This includes:-

  • BOSE Home Theater universal remote control
  • A guide having instructions
  • Brand new batteries

How to program a BOSE Home Theater universal remote for TV?

When you wish to program the BOSE Home Theater universal remote for the TV, the steps are as follows:-

  1. Turn on the TV
  2. Aim the remote at the TV panel and hold the TV button for a while
  3. The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
  4. When it gets turned on press the play or slow button on the remote for 5 seconds
  5. After it, you need to hold the turn-off button.
  6. If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
  7. Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
  8. In case it is not working repeat the procedure and set it up again.

How to program a BOSE Home Theater universal remote for other devices?

Except for TV if you are looking forward to programming the BOSE Home Theater universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-

  1. At the very first turn on the device, You Want to set up and make sure that the BOSE Home Theater universal remote is focused on it.
  2. Now hold the button that helps you to match the device you want to pair.
  3. Wait for a while and check out whether the light of the remote blink and become steady for a while
  4. After the light gets a steady press, the device button and hold it for a while and simultaneously.
  5. Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
  6. Release the power button and the device button
  7. Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
  8. When you will be done with this use the power button on the remote and scan the BOSE Home Theater universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
  9. When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.

How to program the BOSE Home Theater universal remote having the code search button?

If the BOSE Home Theater universal remote available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-

  1. At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the BOSE Home Theater remote code finder)
  2. Turn on the equipment you are looking forward to pairing.
  3. Hold the court start button on the remote for a while
  4. Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
  5. The light on the remote will blink and become steady.
  6. Enter the remote device code you have found, and the light should get turned off.
  7. Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.

FAQ:

Q1: From where a person will be able to purchase the BOSE Home Theater universal remote control?

Ans: When you are looking forward to purchasing BOSE Home Theater universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.

Q2: What can a person do if no button other than power is working?

Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-

  • There might be a chance you are using the wrong BOSE Home Theater universal remote code in this case you need to follow the process again with a different RC Universal code.
  • The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.

Orion TV Universal Remote Codes & Program Instructions

If you are looking forward to programming the Orion TV universal remote but are not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the Orion TV universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.

Check also: Spectrum Universal Remote Codes

Orion tv Universal remote codes

Orion TV Universal Remote Codes

Orion TV Universal Remote 4 Digit Codes List

  • 1056
  • 1030
  • 2028
  • 1054
  • 2000
  • 1230
  • 2136
  • 2005
  • 2108
  • 2218
  • 1167
  • 2007
  • 2033
  • 2035
  • 1133
  • 1020

Orion TV Universal Remote 3 Digit Codes List

  • 748,081, 136, 720

RCA Universal Remote Codes For Orion TV

  • 13650,030, 035, 191, 208, 017, 029, 056, 069, 1030, 1035, 1191, 1024, 1208, 1086, 1090, 1106, 0236, 0463, 1463, 1892, 3540, 10463, 11892, 13540

GE Universal Remote Codes For Orion TV

  • 1781,035, 121, 135, 0121, 0135, 0035, 5004, 5006, 5039, 5040, 5041, 5046, 5055, 5142, 5177, 5235, 5253, 5441, 0281, 0371, 1771

VIZIO Universal Remote Codes For Orion TV

  • 0035,0121, 0135

ONN Universal Remote Codes For Orion TV

  • 5074,5011, 5028, 5060, 5062

Philips Universal Remote Codes For Orion TV

  • 0105,0713, 0115

What a person requires when they want to program the Orion TV universal remote control?

When you are looking forward to programming the Orion TV universal remote control, certain requirements are a must to fulfill. This includes:-

  • Orion TV universal remote control
  • A guide having instructions
  • Brand new batteries

How to program an Orion TV universal remote for TV?

When you wish to program the Orion TV universal remote for the TV, the steps are as follows:-

  1. Turn on the TV
  2. Aim the remote at the TV panel and hold the TV button for a while
  3. The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
  4. When it gets turned on press the play or slow button on the remote for 5 seconds
  5. After it, you need to hold the turn-off button.
  6. If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
  7. Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
  8. In case it is not working repeat the procedure and set it up again.

How to program an Orion TV universal remote for other devices?

Except for TV if you are looking forward to programming the Orion TV universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-

  1. At the very first turn on the device, You Want to set up and make sure that the Orion TV universal remote is focused on it.
  2. Now hold the button that helps you to match the device you want to pair.
  3. Wait for a while and check out whether the light of the remote blink and become steady for a while
  4. After the light gets a steady press, the device button and hold it for a while and simultaneously.
  5. Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
  6. Release the power button and the device button
  7. Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
  8. When you will be done with this use the power button on the remote and scan the Orion TV universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
  9. When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.

How to program the Orion TV universal remote having the code search button?

If the Orion TV universal remote is available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-

  1. At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the Orion TV remote code finder)
  2. Turn on the equipment you are looking forward to pairing.
  3. Hold the court start button on the remote for a while
  4. Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
  5. The light on the remote will blink and become steady.
  6. Enter the remote device code you have found, and the light should get turned off.
  7. Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.

                                                               FAQ:

Q1: From where a person will be able to purchase the Orion TV universal remote control?

Ans: When you are looking forward to purchasing Orion TV universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.

Q2: What can a person do if no button other than power is working?

Ans: Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-

  • There might be a chance you are using the wrong Orion TV universal remote code in this case you need to follow the process again with a different RC Universal code.
  • The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.

Bose Soundbar Universal Remote Codes List and How to Program

If you are looking forward to programming the Bose Soundbar universal remote but are not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the Bose Soundbar universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.

Bose SoundBar universal remote codes

bose universal remote codes list

Bose Soundbar Universal Remote 4 Digit Codes

  • 1229
  • 1256
  • 0666
  • 3741
  • 1960
  • 1280

Bose Soundbar Universal Remote 5 Digit Codes

  • 31934
  • 31935
  • 11144
  • 30189
  • 31933
  • 31517
  • 20752
  • 01982
  • 31229

GE Universal Remote Codes For Bose Soundbar

  • 00027
  • 01885

What a person requires when they want to program the Bose Soundbar universal remote control?

When you are looking forward to programming the Bose Soundbar universal remote control, certain requirements are a must to fulfill. This includes:-

  • Bose Soundbar universal remote control
  • A guide having instructions
  • Brand new batteries

How to program a Bose Soundbar universal remote for TV?

When you wish to program the Bose Soundbar universal remote for the TV, the steps are as follows:-

  1. Turn on the TV
  2. Aim the remote at the TV panel and hold the TV button for a while
  3. The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
  4. When it gets turned on press the play or slow button on the remote for 5 seconds
  5. After it, you need to hold the turn-off button.
  6. If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
  7. Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
  8. In case it is not working repeat the procedure and set it up again.

How to program a Bose Soundbar universal remote for other devices?

Except for TV if you are looking forward to programming the Bose Soundbar universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-

  1. At the very first turn on the device, You Want to set up and make sure that the Bose Soundbaruniversal remote is focused on it.
  2. Now hold the button that helps you to match the device you want to pair.
  3. Wait for a while and check out whether the light of the remote blink and become steady for a while
  4. After the light gets a steady press, the device button and hold it for a while and simultaneously.
  5. Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
  6. Release the power button and the device button
  7. Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
  8. When you will be done with this use the power button on the remote and scan the Bose Soundbar universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
  9. When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.

How to program the Bose Soundbar universal remote having the code search button?

If the Bose Soundbar universal remote is available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-

  1. At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the Bose Soundbar remote code finder)
  2. Turn on the equipment you are looking forward to pairing.
  3. Hold the court start button on the remote for a while
  4. Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
  5. The light on the remote will blink and become steady.
  6. Enter the remote device code you have found, and the light should get turned off.
  7. Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.

FAQ:

Q1: From where a person will be able to purchase the Bose Soundbar universal remote control?

Ans: When you are looking forward to purchasing Bose Soundbar universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.

Q2: What can a person do if no button other than power is working?

Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-

  • There might be a chance you are using the wrong Bose Soundbar universal remote code in this case you need to follow the process again with a different RC Universal code.
  • The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.

Bose Universal Remote Codes & Program Instructions

If you are looking forward to programming the Bose universal remote but are not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the Bose universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.

Bose Universal Remote Codes

bose universal remote codes list

Bose Universal Remote Code For Samsung Smart Tv

  • 12094,10030, 10037, 10163, 10178, 10370, 10519, 10556, 10618, 10650, 10702, 10812, 11060, 11235, 11249, 11312, 11458, 11584, 11619, 11630, 11903, 12051

Bose Universal Remote Code For LG Smart TV

  • 12834,10017, 10030, 10037, 10109, 10163, 10178, 10361, 10370, 10556, 10698, 10714, 10715, 10856, 11178, 11265, 11423, 11447, 11663, 11768, 11842, 12182, 12358, 12424, 12731

Bose Universal Remote Code For Vizio TV

  • 11758,10054, 10864, 10885, 11756

GE Universal Remote Codes For Bose

  • 0672

Bose Universal Remote Codes List

Brand NameCode
88802250
Acer01652
ad notam04640
Admiral00182
Advent01754
Affinity06190
Aiwa00406
Akai00098
Akura00042
America09172
Amoisonic01027
AOC00137
Aomni03796
Apex Digital01550
Ario07710
Astar03127
Asus04030
Atak10715
Atvio06133
Atyme23283
Audinac00888
Audiosonic00103
Audiovox00105
Auria04770
Aventura02561
Avera10673
Avol04037
Axess10359
B & O05274
B Vision08292
Bang & Olufsen00118
Basic Line00121
BBK01055
BenQ02391
BGH03478
Blu:sens03088
Blue Light06152
Blue Sky00134
Bolva23569
Bravis04245
Broksonic00184
BuBuGao02398
Calypso11032
Casio00192
CCE00160
Celera01900
Challenger03070
Champion02647
Changhong01766
Christie06567
Claris06616
CloudWalker28727
Coby02056
Commercial Solutions02427
Conia01806
Contex04280
Continental04261
Continental Electric09173
Craig00161
Crosley00074
Crown Mustang01789
Curtis01897
Curtis Mathes00039
Cytron01594
Daewoo00092
Daytek02024
Delta Electronics31933
Digitrex01808
Disney02440
DNS09059
Dukane07825
Dumont00256
Durabrand02191
Dynex03686
Eagle Kingdom Technology10810
Eiki00873
EKT10809
Electric Mirror04894
Electrograph02534
Electrohome00381
Electron01898
Elektra01132
Element03682
Elite00274
Emerson00236
Envision00278
Epson02108
Epworth09234
EQD05411
EQD Auria05412
Erisson04115
ESA02420
eTec10668
Exorvision30827
Fair Mate06083
Favi07763
Fisher00154
Fluid04827
Fujimaro02746
Funai00179
Furrion11342
Fusion02748
Futura00314
Gateway01168
GE00027
General Electric01885
GFM04001
GHIA31594
Gibralter00333
Global02033
GoldStar00056
GPX01720
H-Buster05926
Haier01767
Hannspree03236
Harper10703
Helios02436
Hewlett Packard01671
Hightong22738
Himitsu02158
Hisense02159
Hitachi00145
Hitech01826
Hiteker01595
HKPro30824
HP02271
HQS04364
Hyundai01206
iLo02464
InFocus00995
Insignia02471
Inteq00893
iRIS04055
IRT01830
iSymphony03863
James06029
JCM04630
Jensen00405
JVC00053
Kalley10154
KC09223
KDS03383
Ken Brown02620
Kenmore02493
KLH00408
Knoll Systems02447
Konka01235
LeEco23006
Legend00940
Lexus06146
LG00511
Liberton04248
Lloyd’s00195
LodgingStar04868
LXI00148
MAG03384
Magnavox00054
Magnum01255
Marantz00128
Master-G02997
Matsushita00478
Maxent02434
MB Quart03792
Memorex00037
Microsonic04673
Midland00493
Miray04998
Misakae10276
Misakai07712
Mitsubishi00150
Mitsubishi Electric09071
Mitsui03847
Mx Onda01629
Mystery04909
Naoki06147
Naxa03571
NEC00170
NetTV02539
NEX03694
Nexus01582
Nexus Electronics04032
Nikko00529
Nimbro04143
Noblex00534
Norcent01838
Nordmende00537
North Tech23351
NuVision03355
oCOSMO10275
Ölevia05964
Onn03472
Optimus00546
Optique06677
Orion00549
Otic02443
Panasonic00051
Panavox04496
Pantel04978
PARK04065
Peerless22978
Peerless-AV22977
Philco00030
Philips00081
Philips Magnavox05965
Pioneer00166
Planar03573
Polaroid02163
Portland00582
Premier01353
Prima00586
Promethean10771
Proscan00883
Proview02133
Pulsar00599
Pyle02421
Pyle Home05674
QFX23019
QuantumFX05970
Quasar00055
Qumi28974
RCA00047
Recco01828
RevolutionHD03687
Riviera10812
Roku02457
Runco00632
Sampo00032
Samsung00060
Sankey10257
Sansei00946
Sansui00067
Sanyo00159
Sceptre02541
Scott00309
Sears00146
Seiki06024
Seiko04451
Seiko Epson05721
Semp00949
Semp Toshiba05722
Sens05143
Serie Dorada02906
Seura05015
Sharp00093
Sigmac05138
Silo05740
Silo Digital05977
Síragon09109
SkyVue22772
Skyworth01424
Solé05978
Soneview09177
Sony00000
Spectroniq03385
Speler08195
Squareview00706
STI06483
SunBriteTV03117
Sungpo23376
Superscan02222
Supersonic02544
Supra00727
Suzuki08893
Suzuki Time06011
SVA01813
Sylvania00024
Symphonic00171
Syntax02432
SZK06013
TAG05190
Taki06148
Tatung00049
TCL02231
Technicolor04758
Technics00250
Tecnomaster10647
Telefunken00757
Thomson00771
TNCi01736
Tonomac03425
Tophouse02157
Tosaki06145
Toshiba00156
TruTech03444
Tyler32064
U-max31089
Upstar09178
V7 Videoseven01986
Venturer01518
Vidao10667
Videoseven05844
Vidikron00814
Viewsonic01805
Viore03579
VisionQuest04494
Vividtouch23437
Vivitek05995
VIZIO02215
Vuon04421
W Box Technologies10796
Wards00187
Watson00822
Westinghouse02258
White Westinghouse00830
Wyse02422
Xoceco02430
Zenith00017

What a person requires when they want to program the Bose universal remote control?

When you are looking forward to programming the Bose universal remote control, certain requirements are a must to fulfill. This includes:-

  • Bose universal remote control
  • A guide having instructions
  • Brand new batteries

How to program a Bose universal remote for TV?

When you wish to program the Bose universal remote for the TV, the steps are as follows:-

  1. Turn on the TV
  2. Aim the remote at the TV panel and hold the TV button for a while
  3. The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
  4. When it gets turned on press the play or slow button on the remote for 5 seconds
  5. After it, you need to hold the turn-off button.
  6. If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
  7. Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
  8. In case it is not working repeat the procedure and set it up again.

How to program a Bose universal remote for other devices?

Except for TV if you are looking forward to programming the Bose universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-

  1. At the very first turn on the device, You Want to set up and make sure that the Bose universal remote is focused on it.
  2. Now hold the button that helps you to match the device you want to pair.
  3. Wait for a while and check out whether the light of the remote blink and become steady for a while
  4. After the light gets a steady press, the device button and hold it for a while and simultaneously.
  5. Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
  6. Release the power button and the device button
  7. Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
  8. When you will be done with this use the power button on the remote and scan the Bose universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
  9. When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.

How to program the Bose universal remote having the code search button?

If the Bose universal remote is available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-

  1. At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the Bose remote code finder)
  2. Turn on the equipment you are looking forward to pairing.
  3. Hold the court start button on the remote for a while
  4. Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
  5. The light on the remote will blink and become steady.
  6. Enter the remote device code you have found, and the light should get turned off.
  7. Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.

FAQ

Q1: From where a person will be able to purchase the Bose universal remote control?

Ans: When you are looking forward to purchasing Bose universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.

Q2: What can a person do if no button other than power is working?

Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-

  • There might be a chance you are using the wrong Bose universal remote code in this case you need to follow the process again with a different RC Universal code.
  • The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.

JBL Soundbar Universal Remote Codes List & How to Program Instructions

If you are looking forward to programming the JBL Soundbar universal remote but are not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the JBL Soundbar universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.

Check alsoJBL Soundbar Universal Remote Codes

JBL DVD Universal Remote Codes

JBL Soundbar 5 Digit Remote Control Codes:

  • 30110
  • 30281
  • 31306
  • 32241

JBL Soundbar 4 Digit Remote Control Codes:

  • 4001
  • 5009
  • 6050

What a person requires when they want to program the JBL Soundbaruniversal remote control?

When you are looking forward to programming the JBL Soundbar universal remote control, certain requirements are a must to fulfill. This includes:-

  • JBL Soundbar universal remote control
  • A guide having instructions
  • Brand new batteries

How to program a JBL Soundbar universal remote for TV?

When you wish to program the JBL Soundbar universal remote for the TV, the steps are as follows:-

  1. Turn on the TV
  2. Aim the remote at the TV panel and hold the TV button for a while
  3. The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
  4. When it gets turned on press the play or slow button on the remote for 5 seconds
  5. After it, you need to hold the turn-off button.
  6. If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
  7. Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
  8. In case it is not working repeat the procedure and set it up again.

How to program a JBL Soundbar universal remote for other devices?

Except for TV if you are looking forward to programming the JBL Soundbar universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-

  1. At the very first turn on the device, You Want to set up and make sure that the JBL Soundbar universal remote is focused on it.
  2. Now hold the button that helps you to match the device you want to pair.
  3. Wait for a while and check out whether the light of the remote blink and become steady for a while
  4. After the light gets a steady press, the device button and hold it for a while and simultaneously.
  5. Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
  6. Release the power button and the device button
  7. Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
  8. When you will be done with this use the power button on the remote and scan the JBL Soundbar universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
  9. When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.

How to program the JBL Soundbar universal remote having the code search button?

If the JBL Soundbar universal remote is available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-

  1. At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the JBL Soundbar remote code finder)
  2. Turn on the equipment you are looking forward to pairing.
  3. Hold the court start button on the remote for a while
  4. Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
  5. The light on the remote will blink and become steady.
  6. Enter the remote device code you have found, and the light should get turned off.
  7. Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.

FAQ

Q1: From where a person will be able to purchase the JBL Soundbar universal remote control?

Ans: When you are looking forward to purchasing JBL Soundbar universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.

Q2: What can a person do if no button other than power is working?

Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-

  • There might be a chance you are using the wrong JBL Soundbar universal remote code in this case you need to follow the process again with a different RC Universal code.
  • The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.

Supersonic DVD Universal Remote Codes List and How to Program

If you are looking forward to programming the Supersonic DVD universal remote but are not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the Supersonic DVD universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.

Check also: Supersonic TV’s Universal Remote Codes

Supersonic DVD Universal Remote Codes

supersonic DVD universal remote codes

Supersonic DVD Universal Remote Codes For One For All

  • 0208
  • 0096

Supersonic DVD Universal Remote 4 Digit Codes List

  • 0698
  • 0805
  • 0264
  • 0208
  • 0556
  • 0096

What a person requires when they want to program the Supersonic DVD universal remote control?

When you are looking forward to programming the Supersonic DVD universal remote control, certain requirements are a must to fulfill. This includes:-

  • Supersonic DVD universal remote control
  • A guide having instructions
  • Brand new batteries

How to program a Supersonic DVD universal remote for TV?

When you wish to program the Supersonic DVD universal remote for the TV, the steps are as follows:-

  1. Turn on the TV
  2. Aim the remote at the TV panel and hold the TV button for a while
  3. The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
  4. When it gets turned on press the play or slow button on the remote for 5 seconds
  5. After it, you need to hold the turn-off button.
  6. If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
  7. Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
  8. In case it is not working repeat the procedure and set it up again.

How to program a Supersonic DVD universal remote for other devices?

Except for TV if you are looking forward to programming the Supersonic DVD universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-

  1. At the very first turn on the device, You Want to set up and make sure that the Supersonic DVD universal remote is focused on it.
  2. Now hold the button that helps you to match the device you want to pair.
  3. Wait for a while and check out whether the light of the remote blink and become steady for a while
  4. After the light gets a steady press, the device button and hold it for a while and simultaneously.
  5. Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
  6. Release the power button and the device button
  7. Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
  8. When you will be done with this use the power button on the remote and scan the Supersonic DVD universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
  9. When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.

How to program the Supersonic DVD universal remote having the code search button?

If the Supersonic DVD universal remote available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-

  1. At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the Supersonic DVD remote code finder)
  2. Turn on the equipment you are looking forward to pairing.
  3. Hold the court start button on the remote for a while
  4. Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
  5. The light on the remote will blink and become steady.
  6. Enter the remote device code you have found, and the light should get turned off.
  7. Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.

                                                            FAQ:

  • Q1: From where a person will be able to purchase the Supersonic DVD universal remote control?

Ans: When you are looking forward to purchasing the Supersonic DVD universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.

  • Q2: What can a person do if no button other than power is working?

Ans: Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-

  • There might be a chance you are using the wrong Supersonic DVD universal remote code in this case you need to follow the process again with a different RC Universal code.
  • The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.

Memorex DVD Universal Remote Codes and Program Instructions

If you are looking forward to programming the Memorex DVD  universal remote but are not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the Memorex DVD universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.

Memorex DVD Universal Remote codes

Memorex DVD Universal Remote Codes list

Memorex DVD Universal Remote 4 Digit Codes

  • 2003
  • 2424
  • 0722
  • 1297
  • 3349

Memorex DVD Universal Remote 5 Digit Codes

  • 31270
  • 32213
  • 20695
  • 20831
  • 21270
  • 30695
  • 30831

RCA Universal Remote Codes for Memorex DVD players

  • 3391
  • 3384

One-For-All Universal Remote Codes for Memorex DVD players

  • 0797
  • 0854

GE Universal Remote Codes for Memorex DVD players

  • 0446
  • 0394

Philips Universal Remote Codes for Memorex DVD players

  • 1413
  • 1913
  • 0246
  • 1606

What a person requires when they want to program the Memorex DVD universal remote control?

When you are looking forward to programming the Memorex DVD universal remote control, certain requirements are a must to fulfill. This includes:-

  • Memorex DVD universal remote control
  • A guide having instructions
  • Brand new batteries

How to program a Memorex DVD universal remote for TV?

When you wish to program the Memorex DVD universal remote for the TV, the steps are as follows:-

  1. Turn on the TV
  2. Aim the remote at the TV panel and hold the TV button for a while
  3. The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
  4. When it gets turned on press the play or slow button on the remote for 5 seconds
  5. After it, you need to hold the turn-off button.
  6. If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
  7. Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
  8. In case it is not working repeat the procedure and set it up again.

How to program a Memorex DVD universal remote for other devices?

Except for TV if you are looking forward to programming the Memorex DVD universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-

  1. At the very first turn on the device, You Want to set up and make sure that the Memorex DVD universal remote is focused on it.
  2. Now hold the button that helps you to match the device you want to pair.
  3. Wait for a while and check out whether the light of the remote blink and become steady for a while
  4. After the light gets a steady press, the device button and hold it for a while and simultaneously.
  5. Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
  6. Release the power button and the device button
  7. Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
  8. When you will be done with this use the power button on the remote and scan the Memorex DVD universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
  9. When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.

How to program the Memorex DVD universal remote having the code search button?

If the Memorex DVD universal remote is available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-

  1. At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the Memorex DVD remote code finder)
  2. Turn on the equipment you are looking forward to pairing.
  3. Hold the court start button on the remote for a while
  4. Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
  5. The light on the remote will blink and become steady.
  6. Enter the remote device code you have found, and the light should get turned off.
  7. Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.

FAQ:

Q1: From where a person will be able to purchase the Memorex DVD universal remote control?

Ans: When you are looking forward to purchasing Memorex DVD universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.

Q2: What can a person do if no button other than power is working?

Ans: Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-

  • There might be a chance you are using the wrong Memorex DVD universal remote code in this case you need to follow the process again with a different RC Universal code.
  • The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.

RCA Home Theater Universal Remote Codes List and Instructions

If you are looking forward to programming the RCA Home Theater universal remote but are not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the RCA Home Theater universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.

rca universal remote codes

                   RCA Home Theater Universal Remote 5 Digit Codes

  • 64257
  • 31254
  • 18192
  • 51472
  • 18704
  • 51216
  • 18448
  • 19216
  • 51728
  • 18960

                             RCA Home Theater Audio Codes

  • 1254
  • 2154
  • 1913

                           RCA Home Theater Video Codes

  • 1022
  • 1060
  • 1132

 What a person requires when they want to program the RCA Home Theater universal remote control?

When you are looking forward to programming the RCA Home Theater universal remote control, certain requirements are a must to fulfill. This includes:-

  • RCA Home Theater universal remote control
  • A guide having instructions
  • Brand new batteries

How to program an RCA Home Theater universal remote for TV?

When you wish to program the RCA universal remote for the TV, the steps are as follows:-

  1. Turn on the TV
  2. Aim the remote at the TV panel and hold the TV button for a while
  3. The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
  4. When it gets turned on press the play or slow button on the remote for 5 seconds
  5. After it, you need to hold the turn-off button.
  6. If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
  7. Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
  8. In case it is not working repeat the procedure and set it up again.

How to program an RCA Home Theater universal remote for other devices?

Except for TV if you are looking forward to programming the RCA Home Theater universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-

  1. At the very first turn on the device, You Want to set up and make sure that the RCA Home Theater universal remote is focused on it.
  2. Now hold the button that helps you to match the device you want to pair.
  3. Wait for a while and check out whether the light of the remote blink and become steady for a while
  4. After the light gets a steady press, the device button and hold it for a while and simultaneously.
  5. Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
  6. Release the power button and the device button
  7. Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
  8. When you will be done with this use the power button on the remote and scan the RCA Home Theater universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
  9. When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.

How to program the RCA Home Theater universal remote having the code search button?

If the RCA Home Theater universal remote is available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-

  1. At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the RCA Home Theater remote code finder)
  2. Turn on the equipment you are looking forward to pairing.
  3. Hold the court start button on the remote for a while
  4. Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
  5. The light on the remote will blink and become steady.
  6. Enter the remote device code you have found, and the light should get turned off.
  7. Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.

FAQ:

Q1: From where a person will be able to purchase the RCA Home Theater universal remote control?

Ans: When you are looking forward to purchasing RCA Home Theater universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.

Q2: What can a person do if no button other than power is working?

Ans: Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-

  • There might be a chance you are using the wrong RCA Home Theater universal remote code in this case you need to follow the process again with a different RC Universal code.
  • The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.

RCA Soundbar Universal Remote Codes List and Instructions

If you are looking forward to programming the RCA Soundbar universal remote but are not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the RCA Soundbar universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.

RCA Soundbar Universal Remote Codes

rca sound bar universal remote codes

                     RCA Soundbar Universal Remote 5 Digit Codes

  • 20060
  • 31254
  • 30531

                     RCA Soundbar Universal Remote 5 Digit Codes

  • 20149
  • 33969
  • 31390
  • 30360
  • 20807
  • 30823
  • 33295
  • 33091
  • 31511
  • 33363
  • 20042
  • 31023
  • 32041
  • 21014
  • 21060
  • 31963
  • 31459
  • 21035
  • 31023
  • 31609
  • 20035
  • 32426
  • 30531
  • 33297
  • 32655
  1. RCA Home Theater Universal Remote Codes
  2. RCA Universal Remote Codes
  3. RCA DVD Universal Remote Codes

       What a person requires when they want to program the RCA Soundbar universal remote control?

When you are looking forward to programming the RCA Soundbar universal remote control, certain requirements are a must to fulfill. This includes:-

  • RCA Soundbar universal remote control
  • A guide having instructions
  • Brand new batteries

              How to program an RCA Soundbar universal remote for TV?

When you wish to program the RCA Soundbar universal remote for the TV, the steps are as follows:-

  1. Turn on the TV
  2. Aim the remote at the TV panel and hold the TV button for a while
  3. The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
  4. When it gets turned on press the play or slow button on the remote for 5 seconds
  5. After it, you need to hold the turn-off button.
  6. If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
  7. Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
  8. In case it is not working repeat the procedure and set it up again.

         How to program an RCA Soundbar universal remote for other devices?

Except for TV if you are looking forward to programming the RCA Soundbar universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-

  1. At the very first turn on the device, You Want to set up and make sure that the RCA Soundbar universal remote is focused on it.
  2. Now hold the button that helps you to match the device you want to pair.
  3. Wait for a while and check out whether the light of the remote blink and become steady for a while
  4. After the light gets a steady press, the device button and hold it for a while and simultaneously.
  5. Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
  6. Release the power button and the device button
  7. Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
  8. When you will be done with this use the power button on the remote and scan the RCA Soundbar universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
  9. When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.

  How to program the RCA Soundbar universal remote having the code search button?

If the RCA Soundbar universal remote is available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-

  1. At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the RCA Soundbar remote code finder)
  2. Turn on the equipment you are looking forward to pairing.
  3. Hold the court start button on the remote for a while
  4. Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
  5. The light on the remote will blink and become steady.
  6. Enter the remote device code you have found, and the light should get turned off.
  7. Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.

                                                              FAQ:

Q1: From where a person will be able to purchase the RCA Soundbar universal remote control?

Ans: When you are looking forward to purchasing RCA Soundbar universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.

Q2: What can a person do if no button other than power is working?

Ans: Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-

  • There might be a chance you are using the wrong RCA Soundbar universal remote code in this case you need to follow the process again with a different RC Universal code.
  • The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.

GPX DVD Player Universal Remote Codes List and Instructions

If you are looking forward to programming the GPX DVD Player universal remote but are not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the GPX DVD Player universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.

Check alsoVerizon FiOS Universal Remote Codes

GPX DVD Player Universal remote codes

GPX DVD Player Universal remote codes

                        GPX DVD Player Universal Remote 4 Digit Codes

  • 0944
  • 2114
  • 0936
  • 2390

                       GPX DVD Player Universal Remote 3 Digit Codes

  • 826
  • 704
  • 098
  • 882

                      GPX DVD Player Universal Remote 5 Digit Codes

  • 22164
  • 51304
  • 20769
  • 54908
  • 22235
  • 20699

      What a person requires when they want to program the GPX DVD Player universal remote control?

When you are looking forward to programming the GPX DVD Player universal remote control, certain requirements are a must to fulfill. This includes:-

  • GPX DVD Player universal remote control
  • A guide having instructions
  • Brand new batteries

                  How to program a GPX DVD Player universal remote for TV?

When you wish to program the GPX DVD Player universal remote for the TV, the steps are as follows:-

  1. Turn on the TV
  2. Aim the remote at the TV panel and hold the TV button for a while
  3. The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
  4. When it gets turned on press the play or slow button on the remote for 5 seconds
  5. After it, you need to hold the turn-off button.
  6. If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
  7. Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
  8. In case it is not working repeat the procedure and set it up again.

             How to program a GPX DVD Player universal remote for other devices?

Except for TV if you are looking forward to programming the GPX DVD Player universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-

  1. At the very first turn on the device, You Want to set up and make sure that the GPX DVD Player universal remote is focused on it.
  2. Now hold the button that helps you to match the device you want to pair.
  3. Wait for a while and check out whether the light of the remote blink and become steady for a while
  4. After the light gets a steady press, the device button and hold it for a while and simultaneously.
  5. Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
  6. Release the power button and the device button
  7. Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
  8. When you will be done with this use the power button on the remote and scan the GPX DVD Player universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
  9. When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.

    How to program the GPX DVD Player universal remote having the code search button?

If the GPX DVD Player universal remote is available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-

  1. At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the GPX DVD Player remote code finder)
  2. Turn on the equipment you are looking forward to pairing.
  3. Hold the court start button on the remote for a while
  4. Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
  5. The light on the remote will blink and become steady.
  6. Enter the remote device code you have found, and the light should get turned off.
  7. Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.

FAQ:

Q1: From where a person will be able to purchase the GPX DVD Player universal remote control?

Ans: When you are looking forward to purchasing GPX DVD Player universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.

Q2: What can a person do if no button other than power is working?

Ans: Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-

  • There might be a chance you are using the wrong GPX DVD Player universal remote code in this case you need to follow the process again with a different RC Universal code.
  • The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.