Craig DVD Universal Remote Codes
If you are looking forward to programming the Craig DVD universal remote but not sure how to do it efficiently, don’t worry. Here we will be going to share certain things related to it so that controlling the Craig DVD universal remote will be an easier thing and next time there will be no need for you to keep track of codes at all.
Craig DVD Universal Remote 4 Digit Codes
RCA universal remote
Sony Universal Remote
What a person requires when they want to program the Craig DVD universal remote control?
When you are looking forward to programming the Craig DVD universal remote control, certain requirements are a must to fulfill. This includes:-
- Craig DVD universal remote control
- A guide having instructions
- Brand new batteries
How to program a Craig DVD universal remote for TV?
When you wish to program the Craig DVD universal remote for the TV, the steps are as follows:-
- Turn on the TV
- Aim the remote at the TV panel and hold the TV button for a while
- The light will get turned on and at the same time hold the on-off button simultaneously and check out whether the light turns on again or not
- When it gets turned on press the play or slow button on the remote for 5 seconds
- After it, you need to hold the turn-off button.
- If the TV turns off this clearly means that it is working and if it doesn’t turn off, you need to press the play or slow button again.
- Repeat this procedure for 5 seconds and check out whether the device gets turned off or not. It clearly indicates that the remote control is in sync with the TV, and there is no need for you to worry about anything at all.
- In case it is not working repeat the procedure and set it up again.
How to program a Craig DVD universal remote for other devices?
Except for TV if you are looking forward to programming the Craig DVD universal remote for other devices at that moment check out, it must have an option for it. You can consider an example of a DVD or any other streaming device. After checking it out, the steps are as follows:-
- At the very first turn on the device, You Want to set up and make sure that the Craig DVD universal remote is focused on it.
- Now hold the button that helps you to match the device you want to pair.
- Wait for a while and check out whether the light of the remote blink and become steady for a while
- After the light gets a steady press, the device button and hold it for a while and simultaneously.
- Hold the power button at that moment the light will turn off and on, and this takes almost 5 seconds.
- Release the power button and the device button
- Make sure that the power button must stay on if it is not, then you need to repeat the above procedure again.
- When you will be done with this use the power button on the remote and scan the Craig DVD universal remote code needed to set up on the device new line if the component gets turned off, it means that the code is paired up with your device and if it is not you need to repeat the procedure again.
- When you are done with that press the stop button for saving the code and check out all the functions, within no time, you will be able to get an idea about it.
How to program the Craig DVD universal remote having the code search button?
If the Craig DVD universal remote available with you as the code search button then there is no need for you to engage in any difficult procedure. For it, the steps are quite straightforward. These are as follows:-
- At the very first look for the device code, you want to control. (In the remote control manual the code is available otherwise you can use the Craig DVD remote code finder)
- Turn on the equipment you are looking forward to pairing.
- Hold the court start button on the remote for a while
- Along with it press the button on the universal remote code that matches the equipment you are looking forward to pairing.
- The light on the remote will blink and become steady.
- Enter the remote device code you have found, and the light should get turned off.
- Test the remote and try some other functions as well to be sure whether everything is working fine or not. In case it is not working, you need to repeat the set of instructions.
Q1: From where a person will be able to purchase the Craig DVD universal remote control?
Ans: When you are looking forward to purchasing Craig DVD universal remote code, there is nothing to worry about. You can search for it on online shopping platforms or any of the nearby shops serving you will find electronic gadgets.
Q2: What can a person do if no button other than power is working?
Two possibilities are there which can contribute to the problem where all other buttons are not working except the power button. These are as follows:-
- There might be a chance you are using the wrong Craig DVD universal remote code in this case you need to follow the process again with a different RC Universal code.
- The equipment you have purchased is not fully compatible with the universal remote. This sometimes happens with devices that are not upgraded to present Technology.